I'm sooooo excited about today's DIY project, even though things didn't go
exactly as planned.
When Hubby and I gave our oak kitchen
a spunky turquoise makeover -
painting the cabinets turquoise, ripping down the tiny awkward cabinetry for more storage
in the form of open shelving, and
building solid white washed maple counters from scratch - we left the vinyl flooring untouched. I often cropped it out of photos (
like these), but
you can spot it in a post about my case study planter:
It was a cute enough pattern in a neutral, creamy hue with flecks of teal. It looked okay but, frankly, because it extends into the adjacent entryway, shoe closet, laundry room and powder room, we were just too lazy to replace it! It would have been one of those mushroom jobs, where you end up just gutting a room and repainting the entire house. So we left the floors. They were, however, a little grungy and dirt loved to settle in deep gauges the former owners had made.
After the turquoise kitchen makeover was complete, I scrubbed the floors on my hands and needs with a stiff bristled brush and caustic cleaner and eventually made them look shiny and new. Fast forward exactly
three days and the dirt and grime had settled in the deep scratches again. A simple mopping did little. Then I realized that although Szuka sheds very little, she brings in
a lot of debris from the yard, so sweeping or mopping the light floors became a daily task.
I had seen tutorials about painting vinyl flooring (from
Designer Trapped in a Lawyer's Body and
View Along the Way), but neither of their laundry rooms seemed to as high traffic as my space. I waffled between painting and doing peel and stick - until we finished
the bathroom reno. I just loved how the matte charcoal grey tiles looked and decided I wanted to test out the same look in the kitchen and adjoining rooms. Unable to find the exact peel and stick tile, I decided to take the plunge and try paint, figuring that if all else fails, I could still do peel and stick. I had nothing to lose!
I decided to an another step to the pained vinyl floor tutorials I had seen online, though...
This was the plan: paint the vinyl floors a charcoal grey, then add a clear coat with fine flecks of black glitter. I was hoping the floor would look less "painted" with the flecks of glitter. I was also banking on the subtle sheen and speckles disguising crumbs and the like.
Although the painted vinyl floor turned out so beautifully, I ran into a little trouble with the glitter, thanks to the clear coat not cooperating with the paint. I'm still chatting with my local paint store to figure out if it was because the base coat was still off-gassing, or maybe because they weren't compatible to begin with. There might still be a glitter top coat in my future but, for now, I really, really love how my dark grey painted vinyl floors turned out so I wanted to share!
If you've been eyeing up an ugly vinyl floor in your house, here's how we painted our vinyl - along with some tips to make painting a floor in a high traffic area (like a kitchen or entryway) a little easier.
Supplies:
How to Prepare to Paint a Vinyl Floor
Like most DIY projects, the prep work is the most important. This will sound silly, but I spent an entire day getting the kitchen ready before we even touched the floor. I batch cooked a week's worth of meals and stockpiled easy to re-heat grub. I washed a bunch of laundry, washed all of the dishes, emptied the dishwasher, grabbed some paper plates and the microwave from our basement and thought about how we'd live without access to the kitchen, laundry room, and front door.
How to Prep a Vinyl Floor for Paint
Hubby and I thoroughly scrubbed the floors with a stiff bristle brush and TSP, which we realized after isn't recommended by Zinsser but we rinsed it well - I recommend a TSP substitue. Then we scuff sanded, which didn't really take that long. A circular sander (which we don't have) would make light work of this task. Finally, we washed the floors once again and rinsed really, really well so no residue remained. We moved the appliances out of the way.
How to Prime a Vinyl Floor for Paint
We waited for the floors to dry overnight and then applied a coat of Zinsser 123 primer the next morning, which I had the store tint a dark grey.
We treated it much like a wall: we both edged because it took longer and then one of us rolled the primer on. I free-handed the edging because I knew if I taped, I'd surely miss places and leave a sliver of beige vinyl tile.
Here's an important tip: I kept a swiffer cloth handy and quickly dry wiped each area before painting, just to catch any rogue fuzzies (I caught a lot!). Any place where we primer or painted over a crumb (it happened a few times), when the crumb was finally knocked loose, we were left with a bear spot to touch up, so making sure the floor was spotless was essential to good adhesion and a nice looking paint job.
How to Paint a Vinyl Floor
Once the primer had dried for 24 hours, we pushed the appliances back. The primer and paint were really similar and I was really worried the appliances would scratch up the finish paint job. After pushing everything back, we started applying the paint.
The Porch and Floor enamel we used was the same brand of Porch and Floor enamel I used for
the DIY painted particle board floor I tackled (I used a different brand, but the same kind of product, for
the DIY painted concrete floor in the townhouse laundry room). Concrete is SO much easier to paint, probably because it is porous and these products are designed for it. With the tinted primer, though, painting the vinyl floor went smoothly. We edged together and then one of us rolled again, being careful not to paint ourselves into a corner. I used a tiny brush to get in between the wall and the side of the appliances - you cannot see back there at all, anyway.
One problem to watch out for: the floor enamel did not like being applied to drier areas, so we had to work quickly and keep a wet edge.
We applied two coats, waiting 24 hours in between coats. We lit a fire on one damp evening so the house wasn't too humid. 24 hours after the second coat, it was fine to walk on, although we were careful to only wear socks and not drop anything sharp. Szuka was expressly banned!
How to Mess up the Glitter Top Coat
After letting the second coat dry for 36 hours, we started with the glitter top coat. I had bought a clear coat recommended by the paint store employees and I purchased a pound of glitter. They were dubious about my painting a vinyl floor plan, so I knew I was taking a risk.
I poured a a third to one half of the bag into the clear coat (which I poured into a clean pail, first) and mixed really well. I brushed it onto my paint stick to get a feel for how glittery it would be, and it looked perfect! Just a hint of sparkly, not a full on glitter floor. The clear coat was milky but was supposed to dry clear.
We got our supplies ready and started to apply the clear coat to the floor when we both noticed it was sort of seizing up. We quickly washed it off and ran to the garage to do some testing. Was it the glitter? The vinyl? The paint? I applied the glitter top coat to various surfaces: painted trim scraps, a stained piece of wood, the stir stick with floor paint on it. Every surface was fine (and SO pretty) except for the stir stick - the paint and clear coat were reacting.
The Results of my Painted Vinyl Floor DIY
We decided to forgo the glitter top coat for now, but once I hear back from the paint store I might still go ahead with it, but the matte look does really mimic
the painted fireplace and
the bathroom floor tile, so the cohesion and flow in the house is looking pretty darn awesome (time for an updated house tour!).
I'm also loving that the floors no longer sport streaks of perma-dirt:
Again, I didn't hate the before - the cream vinyl floor was nice but although it photographed well, in real life it looked pretty beat up. Here's a look at the before again:
This is going to be a great way to experiment with dark grey floors in here and see if we like them in time, before committing to a major reno and thousands of dollars of tile work. (A couple of my photos have some lighter spots in them - I think my camera lens needs a cleaning, because those do not exist in real life - the floors look evenly colored).
How Does a Painted Vinyl Floor Hold Up?
So far, it holds up well! It's been over a week and we have had absolutely no issues (knock on wood), but the primer takes a full seven days to harden - and the paint thirty - so I'm trying to keep Szuka and her claws away but she still sneaks in once a day but there are no scratches.
I really like how the design of the old floor sort of peeks through. Walking on the floor feels weird, though, because it tricks my mind into thinking it's concrete because of the texture. It's no longer as smooth as the vinyl but it's not rough, either - just sort of more matte, like the matte tile in the bathroom. Importantly, it swiffers really well - no issue with dust getting stuck of anything - which is such a relief! You wouldn't guess this is a painted floor.
My Tips for Painting a Vinyl Floor:
- Chat with the pros about what products to use - not all primers can withstand foot traffic, for example.
- Spend a few days making a list about what you'll need from the room(s) you're painting because it will be off limits while the paint dries.
- Read the can labels but don't defer to paint store staff - do your own research too! I found a LOT of helpful stuff in some DIY forums.
- Don't skip the prep work: clean, sand and prime properly for maximum adhesion.
- Keep a dry swiffer cloth handy to wipe each spot before applying primer and paint because little dust bunnies and flecks of stuff prevent paint from adhering properly.
- Edge and roll just like you would a wall, making sure to keep a wet edge
- Keep dust, pets, and people out of the area to avoid any pesky dust bunnies or hairs getting stuck in the fresh paint
The painted vinyl certainly lends more contrast,
making the turquoise cabinets pop, drawing more attention
to our beautiful maple counters! I'm actually working on a mini face lift for the powder room, so when that's done I'll show you the new painted flooring in all of the rooms - and give you another update on how well it has held up.
Cross your fingers for me!
